AB - 150 Hydro Pneumatic Plastic Injector

AB Plastic Injectors - AB-150

The AB-150 hydro-pneumatic plastic injector combines the economy of our manual plastic injector with the power of a lever operated 2 ton power clamp. The AB-150 plastic injection machine is based on an ergonomical workstation design with the added convenience of an adjustable mold stop with automatic ejector.

AB-150 Additional Features:

The AB-150 Plastic Injector features an injection cylinder capable of 6333PSI. Coupled with the power clamp which eliminates the need for manual clamping, the configuration of this table top machine is offset in order to allow for faster operation while processing small to medium production runs. Mold height is up to 2.5” and sprue center line is 7/8”.


Download a PDF copy of the parts list for plastic injectors.

Download the PDF




Clamp Force(lbs)4000/5500lbs
Shot Capacity1/4oz (6grams)
Injection press,@ 125PSI6333PSI
Voltage required*120V 50/60HZ
Heat capacity400 watts
Temperature range100ºF-650ºF
Mold Height2-1/2"
Sprue Centre Line7/8"
Daylight bet. mold opening2" to 2-1/4"
Maximum molding area3 sq. inches
Cycle TimePer Operator
Ram Diameter9/16 (14.28mm)
Nozzle Orifice0.093
Hopper Capacity7.85oz(220grams)
Machine Dimension28"x21"x27"
Machine Weight82.5lbs. (37.5KG)