The AB-150 hydro-pneumatic plastic injector combines the economy of our manual plastic injector with the power of a lever operated 2 ton power clamp. The AB-150 plastic injection machine is based on an ergonomical workstation design with the added convenience of an adjustable mold stop with automatic ejector.
The AB-150 Plastic Injector features an injection cylinder capable of 6333PSI. Coupled with the power clamp which eliminates the need for manual clamping, the configuration of this table top machine is offset in order to allow for faster operation while processing small to medium production runs. Mold height is up to 2.5” and sprue center line is 7/8”.
Download a PDF copy of the parts list for plastic injectors.
Model | AB-150 |
|---|---|
| Clamp Force(lbs) | 4000/5500lbs |
| Shot Capacity | 1/4oz (6grams) |
| Injection press,@ 125PSI | 6333PSI |
| Voltage required | *120V 50/60HZ |
| Heat capacity | 400 watts |
| Temperature range | 100ºF-650ºF |
| Mold Height | 2-1/2" |
| Sprue Centre Line | 7/8" |
| Daylight bet. mold opening | 2" to 2-1/4" |
| Maximum molding area | 3 sq. inches |
| Cycle Time | Per Operator |
| Ram Diameter | 9/16 (14.28mm) |
| Nozzle Orifice | 0.093 |
| Hopper Capacity | 7.85oz(220grams) |
| Machine Dimension | 28"x21"x27" |
| Machine Weight | 82.5lbs. (37.5KG) |
Designed by Ottawa Professional SEO Services
